Attachments

Sand Salt Spreader

The Sand Salt Spreader is used to spread sand, salt or grit material, with grain size of 4 to 8 mm, for winter maintenance of roads, pavements, car parks and other areas. It is equipped with a dosing auger which discharges the grit onto the stainless steel spreading disc with its own power. The dosi

Your machine

Wheel loader: 109 R04 · machine weight 2 – 6 t

Size
Max. Spreading Width (mm)
6,000
Min. Spreading Width (mm)
3,000
Volume (l)
400

Price on request

Mounting adapted to your machine free of charge
All parametersCompare
Maroš TužinskýTechnical line — attachments+421 918 873 496
Overview

The Sand Salt Spreader is used to spread sand, salt or grit material, with grain size of 4 to 8 mm, for winter maintenance of roads, pavements, car parks and other areas

It is equipped with a dosing auger which discharges the grit onto the stainless steel spreading disc with its own power. The dosing auger and the spreading disc can adjust the width and density of the spread by means of the control which is part of the basic model.

Benefits

  • The main functional parts are made of stainless steel
  • Positional lights (available only for 109 R10)
  • Support leg for stability when stationary (available only for 109 R10)
  • Cover sheet included (available only for 109 R10)
  • The spreader can be equipped with a self-loading frame (available only for 109 R10)
  • Electric control of the dosing auger and the spreading disc (available only for 109 R10)
  • Reliable and strong construction
Specifications

Technical parameters

Parameter
Base MachineSkid steer loaderWheel loaderTractor
Max. Spreading Width (mm)6,000
Min. Spreading Width (mm)3,000
Volume (l)4001,000
Required Hydraulic Oil Flow (l/min)60 – 80
Required Hydraulic Oil Pressure (bar)160 – 210
Total Width (mm)1,8202,135
Weight (kg)300630
Weight of Base Machine (t)2 – 64 – 12
Base Machine
Skid steer loaderWheel loader
Max. Spreading Width (mm)
6,000
Min. Spreading Width (mm)
3,000
Volume (l)
400
Required Hydraulic Oil Flow (l/min)
60 – 80
Required Hydraulic Oil Pressure (bar)
160 – 210
Total Width (mm)
1,820
Weight (kg)
300
Weight of Base Machine (t)
2 – 6

Specifications are subject to change

Which sizes of the Sand Salt Spreader are made?

2 sizes: 109 R04, 109 R10. Choose the size in the parameter table above; every figure on this page follows that choice.

Which machines can the Sand Salt Spreader be mounted on?

Mounts on: skid steer loader, wheel loader, tractor. The carrier should weigh 2 – 12 t; the exact size for your machine is in the table. The mounting is adapted to your quick coupler at no extra charge — tell us the machine.

What hydraulic oil flow is needed for the Sand Salt Spreader?

60 – 80 l/min of oil flow, depending on the size. Working pressure 160 – 210 bar. Check the figure on your machine's hydraulic circuit; if it is lower, a smaller size may fit.

What is the weight of the Sand Salt Spreader?

300 – 630 kg, by size. The exact weight of each size is in the parameter table.

How do I get a price for the Sand Salt Spreader?

Prices are individual: they depend on the size, the configuration and the country. Send the quote request above with your size and machine and an engineer replies within 48 hours.