Attachments

COMBI Sweeper

The COMBI Sweeper with a collection container is designed for sweeping dust, rubbish and other waste material from roads, courtyards, parking lots etc. into the collection container and its subsequent unloading onto a collection vehicle. Thanks to its robust construction and different working widths

Your machine

81 125: tractor, skid steer loader, wheel loader, forklift · machine weight 1,6 – 8 t

Size
Sweeping Width (mm)
1,250
Brush Diameter (mm)
600
Tilting Method
manual

Price on request

Mounting adapted to your machine free of charge
All parametersCompare
Maroš TužinskýTechnical line — attachments+421 918 873 496
Overview

The COMBI Sweeper with a collection container is designed for sweeping dust, rubbish and other waste material from roads, courtyards, parking lots etc. into the collection container and its subsequent unloading onto a collection vehicle

Thanks to its robust construction and different working widths, this sweeper is ideal for cleaning streets and pavements of any size.

Benefits

  • Efficient cleaning of various size areas with little effort in a short time
  • Can be used as an angle brush
  • Option to equip the sweeper with a sprinkler and a side brush
  • Brushes can be plastic, steel, or a combination of both
Specifications

Technical parameters

Parameter
Base MachineTractorSkid steer loaderWheel loaderForklift
Sweeping Width (mm)1,2501,5501,800
Brush Diameter (mm)600
Tilting Methodmanual
Tilting Angle (°)±15
Water Volume (l)100160
Collection Container Volume (m³)0.100.140.16
Opening of the Collection Containerhydraulic
Floatyes
Required Hydraulic Oil Flow (l/min)40 – 80
Required Hydraulic Oil Pressure (bar)180 – 240
Weight (kg)320360400
Weight of Base Machine (t)1,6 – 8
Base Machine
TractorSkid steer loaderWheel loaderForklift
Sweeping Width (mm)
1,250
Brush Diameter (mm)
600
Tilting Method
manual
Tilting Angle (°)
±15
Water Volume (l)
100
Collection Container Volume (m³)
0.10
Opening of the Collection Container
hydraulic
Float
yes
Required Hydraulic Oil Flow (l/min)
40 – 80
Required Hydraulic Oil Pressure (bar)
180 – 240
Weight (kg)
320
Weight of Base Machine (t)
1,6 – 8

Specifications are subject to change

Which sizes of the COMBI Sweeper are made?

3 sizes: 81 125, 81 155, 81 180. Choose the size in the parameter table above; every figure on this page follows that choice.

Which machines can the COMBI Sweeper be mounted on?

Mounts on: tractor, skid steer loader, wheel loader, forklift. The carrier should weigh 1.6 – 8 t; the exact size for your machine is in the table. The mounting is adapted to your quick coupler at no extra charge — tell us the machine.

What hydraulic oil flow is needed for the COMBI Sweeper?

40 – 80 l/min of oil flow, depending on the size. Working pressure 180 – 240 bar. Check the figure on your machine's hydraulic circuit; if it is lower, a smaller size may fit.

What is the weight of the COMBI Sweeper?

320 – 400 kg, by size. The exact weight of each size is in the parameter table.

How do I get a price for the COMBI Sweeper?

Prices are individual: they depend on the size, the configuration and the country. Send the quote request above with your size and machine and an engineer replies within 48 hours.