The Rear Dozer Blade for Tractor is tilted hydraulically. On its rear side, there are two hydraulic cylinders which allow it to tilt to either side.
Tractor: 73 200 – 73 300 · machine weight 2 – 13 t
Price on request
Mounting adapted to your machine free of chargeOn its rear side, there are two hydraulic cylinders which allow it to tilt to either side.
| Parameter | ||||
|---|---|---|---|---|
| Base Machine |  | |||
| Width (mm) | 2,000 | 2,400 | 2,700 | 3,000 |
| Tractor Power (kW) | 25 – 40 | over 40 | ||
| Tilt Angle (°) | ±20 | |||
| Tilt Method | hydraulic | |||
| Brit Material | rubber / hardox | |||
| Required Hydraulic Oil Flow (l/min) | 20 – 100 | |||
| Required Hydraulic Oil Pressure (bar) | 160 – 240 | |||
| Weight (kg) | 400 | 430 | 470 | 500 |
| Weight of Base Machine (t) | 2 – 13 | |||
Specifications are subject to change
4 sizes: 73 200, 73 240, 73 270, 73 300. Choose the size in the parameter table above; every figure on this page follows that choice.
Mounts on: tractor. The carrier should weigh 2 – 13 t; the exact size for your machine is in the table. The mounting is adapted to your quick coupler at no extra charge — tell us the machine.
20 – 100 l/min of oil flow, depending on the size. Working pressure 160 – 240 bar. Check the figure on your machine's hydraulic circuit; if it is lower, a smaller size may fit.
400 – 500 kg, by size. The exact weight of each size is in the parameter table.
Prices are individual: they depend on the size, the configuration and the country. Send the quote request above with your size and machine and an engineer replies within 48 hours.
