Welding positioners · SP

Welding positioners type SP

Bearing capacity 0.6 – 15 t

A three-axis positioner without anchoring requirement allows independent position adjustments in three axes. In comparison with the screw positioners, the hydraulic arm lift significantly speeds up the height adjustment. The positioner, even in its basic configuration, features stepless adjustment o

Bearing capacity
Arm Torque (Nm)
1,460
Table Torque (Nm)
1,250
Arm Rotation Speed (rpm)
0.1 – 1.5
Table Rotation Speed (rpm)
0.1 – 1.7
All parametersCompare
Peter DanihelTechnical line — positioners+421 918 688 860
Overview

A three-axis positioner without anchoring requirement allows independent position adjustments in three axes

In comparison with the screw positioners, the hydraulic arm lift significantly speeds up the height adjustment. The positioner, even in its basic configuration, features stepless adjustment of table rotation speed in its entire range and is equipped with a START-STOP system. Various optional features of the control system further expand the control capabilities of the positioner. In addition to manual operation, the positioner can be equipped with a position programming system.

Standard equipment

  • No anchoring required
  • Hydraulic arm lift
  • Stepless arm rotation speed control
  • Stepless table speed control with START-STOP

On request

  • Option to change the arm position and thus the centre of gravity of the weldment
  • Remote control
  • Foot switch for START-STOP
  • Position programming
  • Customization of the clamping table to customer specification
  • Arm extension
  • Lift increase
Specifications

Technical parameters

Parameter
Bearing Capacity (kg)6001,2002,5005,00010,00015,000
Arm Torque (Nm)1,4604,61010,59024,15053,250141,500
Table Torque (Nm)1,2502,5304,7808,30029,38041,730
Arm Rotation Speed (rpm)0.1 – 1.50.06 – 0.80.07 – 0.90.04 – 0.60.04 – 0.50.03 – 0.4
Table Rotation Speed (rpm)0.1 – 1.70.1 – 1.10.07 – 1.10.09 – 1.30.05 – 0.70.05 – 0.7
Lifting Speed (m/min)0.71.21.31.11.00.9
Weight (kg)1,4502,3603,8507,15014,85023,200
Bearing Capacity (kg)
600
Arm Torque (Nm)
1,460
Table Torque (Nm)
1,250
Arm Rotation Speed (rpm)
0.1 – 1.5
Table Rotation Speed (rpm)
0.1 – 1.7
Lifting Speed (m/min)
0.7
Weight (kg)
1,450

Specifications are subject to change

Open the drawing
Dimensions
A
2,590mm
B
1,550mm
C
1,690mm
D
700mm
P
1,336mm
R
1,000mm
Z
600mm
Hmin
500mm
Which sizes of the Welding positioners type SP are made?

6 sizes: SP 6, SP 12, SP 25, SP 50, SP 100, SP 150. Choose the size in the parameter table above; every figure on this page follows that choice.

What weldment weight can the Welding positioners type SP carry?

Bearing capacity 600 – 15 000 kg across the sizes. Count the weight of the weldment together with its clamping fixture, and pick the smallest size above that figure.

What is the weight of the Welding positioners type SP?

1 450 – 23 200 kg, by size. The exact weight of each size is in the parameter table.

How do I get a price for the Welding positioners type SP?

Prices are individual: they depend on the size, the configuration and the country. Send the quote request above with your size and machine and an engineer replies within 48 hours.