Attachments

Hydraulically Tiltable Ditch Cleaning Bucket

The Hydraulically Tiltable Ditch Cleaning Bucket is suitable for levelling and cleaning excavations, especially in canals and on slopes. The manipulated soil or dirt must be free from large stones and hard materials. Both the R1 and R2 Series contain one hydraulic cylinder. The R2 is larger and more

Your machine

Backhoe loader: SVH-R1 800 – SVH-R1 1300 · SVH-R2 1400 – SVH-R3 2000 · machine weight 2.5 – 5 t

Series
Size
Width (mm)
800
Tilt Angle (°)
±45
Nominal Volume (l)
130

Price on request

Mounting adapted to your machine free of charge
All parametersCompare
Maroš TužinskýTechnical line — attachments+421 918 873 496
Overview

The Hydraulically Tiltable Ditch Cleaning Bucket is suitable for levelling and cleaning excavations, especially in canals and on slopes

The manipulated soil or dirt must be free from large stones and hard materials.

Both the R1 and R2 Series contain one hydraulic cylinder. The R2 is larger and more powerful than the R1. The R3 Series is the largest and contains two hydraulic cylinders.

Benefits

  • The bucket edge is made of hardox
  • Holes on the sides of the bucket for water drainage
  • An oil flow direction converter, a screw-in replaceable edge and hydraulic cylinder covers can be purchased separately
  • Tilt range ±45°
  • Reliable and strong construction
Specifications

Technical parameters

Series
Parameter
Base MachineMini excavatorBackhoe loader2 – 4 t · 2.5 – 5 t
Width (mm)8009001,0001,1001,2001,300
Tilt Angle (°)±45
Nominal Volume (l)130145160175190205
Required Hydraulic Oil Flow (l/min)30 – 100
Required Hydraulic Oil Pressure (bar)160 – 240
Weight (kg)90100110120130140
Weight of Base Machine (t)2 – 5
Base Machine
Mini excavatorBackhoe loader2 – 4 t · 2.5 – 5 t
Width (mm)
800
Tilt Angle (°)
±45
Nominal Volume (l)
130
Required Hydraulic Oil Flow (l/min)
30 – 100
Required Hydraulic Oil Pressure (bar)
160 – 240
Weight (kg)
90
Weight of Base Machine (t)
2 – 5

Specifications are subject to change

Which sizes of the Hydraulically Tiltable Ditch Cleaning Bucket are made?

12 sizes: SVH-R1 800, SVH-R1 900, SVH-R1 1000, SVH-R1 1100, SVH-R1 1200, SVH-R1 1300, SVH-R2 1400, SVH-R2 1500, SVH-R2 1600, SVH-R3 1600, SVH-R3 1800, SVH-R3 2000. Choose the size in the parameter table above; every figure on this page follows that choice.

Which machines can the Hydraulically Tiltable Ditch Cleaning Bucket be mounted on?

Mounts on: mini excavator, backhoe loader, excavator. The carrier should weigh 2 – 15 t; the exact size for your machine is in the table. The mounting is adapted to your quick coupler at no extra charge — tell us the machine.

What hydraulic oil flow is needed for the Hydraulically Tiltable Ditch Cleaning Bucket?

30 – 100 l/min of oil flow, depending on the size. Working pressure 160 – 240 bar. Check the figure on your machine's hydraulic circuit; if it is lower, a smaller size may fit.

What is the weight of the Hydraulically Tiltable Ditch Cleaning Bucket?

90 – 480 kg, by size. The exact weight of each size is in the parameter table.

How do I get a price for the Hydraulically Tiltable Ditch Cleaning Bucket?

Prices are individual: they depend on the size, the configuration and the country. Send the quote request above with your size and machine and an engineer replies within 48 hours.